# OpenShell Control THIS IS TRACKING current NVIDIA NemoClaw `main` with the OpenShell version declared compatible by NemoClaw's blueprint. OpenShell Control is a local, development-stage dashboard for operating OpenShell sandboxes and their OpenClaw gateway dashboards. It is currently built for active development and lab use. It includes a simple password gate, but it is not a hardened production control plane yet. ## Current Status - Development software. Expect fast-moving APIs and sharp edges. - Designed to run near the OpenShell gateway host. - Uses local shell/CLI access for sandbox lifecycle, network policy grants, file transfer, and OpenClaw dashboard proxying. - Authentication is intentionally simple so a future dev team can replace it with a real identity provider. ## Features - View live OpenShell sandbox inventory. - Create, destroy, and restart OpenClaw and Hermes sandboxes. - Launch a sandbox-specific OpenClaw Gateway Dashboard through the local proxy. - Approve or reject pending OpenShell network permission requests. - Configure per-sandbox inference routes for Ollama, NIM, vLLM, and external endpoints. - Poll Ollama for available models. - Search the official MCP Registry, install MCP server definitions, and manage preconfigured/custom MCP servers. - Enforce per-sandbox MCP access through a control-plane broker so sandboxes only see allowed capabilities. - Upload files into sandboxes and download files back out. - Open an operator terminal for the selected sandbox. - Simple local login, setup account, forgot password, and recovery token flow. Screenshot 2026-04-27 at 3 40 27 PM Screenshot 2026-04-27 at 3 41 01 PM Screenshot 2026-04-27 at 3 41 12 PM Screenshot 2026-04-27 at 3 41 33 PM Screenshot 2026-04-27 at 3 41 49 PM Screenshot 2026-04-27 at 3 42 09 PM Screenshot 2026-04-27 at 3 42 37 PM ## Compatibility Targets This dashboard is validated against the current NVIDIA NemoClaw repo and the OpenShell version range declared in NemoClaw's `nemoclaw-blueprint/blueprint.yaml`, not the older April 2026 point releases. Current NemoClaw `main` pins OpenShell exactly to `0.0.116`, so the bundled refresh helper defaults to: - OpenShell installer release: `v0.0.116` (`OPENSHELL_VERSION=v0.0.116`) - NemoClaw source ref: `main` (`NEMOCLAW_INSTALL_REF=main`) - OpenClaw base-image build target: `2026.7.1` (`OPENCLAW_VERSION=2026.7.1`) unless overridden Runtime/toolchain versions used during development: - Ubuntu/Linux host - Node.js `20+` (Node `22.x` recommended for parity with NemoClaw) - npm `10+` - Docker `24+` - OpenShell CLI and gateway compatible with current `NVIDIA/NemoClaw` blueprint constraints - NemoClaw CLI compatible with the current `NVIDIA/NemoClaw` repo Use `./install_versioned_nemoclaw_openshell.sh` to install or refresh the OpenShell/NemoClaw pair. Override `OPENSHELL_VERSION`, `NEMOCLAW_INSTALL_REF`, or `OPENCLAW_VERSION` only when intentionally testing a different pair. The app uses Next.js `15.5.15`, React `18.3.1`, TypeScript, Tailwind CSS, `ws`, `node-pty`, and the official MCP TypeScript SDK. ## Prerequisites Install and verify: ```bash node -v npm -v docker ps openshell --version ``` Optional, but useful for stdio MCP servers installed through the broker: ```bash npx --version uvx --version ``` OpenShell must already be installed and able to reach its gateway. On this host the active gateway metadata lives under: ```bash ~/.config/openshell/gateways/ ``` The installer does not create an OpenShell gateway for you. Start or connect OpenShell first, then install this dashboard. Controller commands follow OpenShell's active gateway by default. Set `OPENSHELL_GATEWAY` only for an intentional override; leaving it unset also allows current NemoClaw to restore a port-qualified gateway such as `nemoclaw-8990` when its installer selected an alternate gateway port. Quick Deploy image discovery checks both the default NemoClaw registry and its numeric alternate-port registry roots, and fails closed if a sandbox name is registered under multiple gateways. ## Installer Install or refresh the locked OpenShell/NemoClaw pair first: ```bash ./install_versioned_nemoclaw_openshell.sh ``` That helper defaults to `OPENSHELL_VERSION=v0.0.116`, `NEMOCLAW_INSTALL_REF=main`, and `OPENCLAW_VERSION=2026.7.1`. Then install the dashboard from the repository root: ```bash ./install.sh ``` The installer: - checks Node, npm, Docker, OpenShell CLI availability, sandbox inventory reachability, and default port occupancy; - installs or verifies the MCP package runners used by bundled stdio servers: `npx` and `uvx`; - installs npm dependencies with `npm ci` when `package-lock.json` exists; - runs a non-blocking `npm audit` summary; - creates `.env.local` if needed; - generates a local dashboard password, signing secret, and recovery token if they are missing; - adds MCP broker defaults for token TTL and request timeout; - runs `npm run build` as a verification step. It refuses to run as root unless `--allow-root` is supplied. It does not install or manage a systemd service. Options: ```bash ./install.sh --no-build ./install.sh --no-audit ./install.sh --clean-next ./install.sh --allow-root ./install.sh --start ./install.sh --help ``` After install, read the generated local password from: ```bash grep OPENSHELL_CONTROL_PASSWORD .env.local ``` ## Run For local development with hot reload: ```bash npm run dev ``` For a long-running dashboard or controller node, build once and run the custom server in production mode: ```bash npm run build npm run start ``` Open: ```text http://localhost:3000 ``` Default ports: - `3000`: dashboard HTTP server - `3011`: operator terminal upstream If you set `OPENSHELL_TERMINAL_ATTACH_TEMPLATE`, leave `{sandboxId}` and `{alias}` unquoted in the template. The terminal bridge validates sandbox IDs and shell-quotes those placeholder values before executing the template. The dashboard WebSocket proxy is served on the same listener by default, using `/api/openshell/dashboard/proxy` or `/api/openshell/instances/[instanceId]/dashboard/proxy`. Set `OPENCLAW_DASHBOARD_WS_PROXY_PORT=3001` only if you intentionally want the legacy dedicated sidecar listener. ## Ollama Inference For WSL2 demo hosts, prefer running Ollama inside WSL2 and routing OpenShell through `ollama-local` at `http://127.0.0.1:11434/v1`. This avoids Windows/WSL host routing surprises and was validated with both `qwen2.5:7b` and `nemotron-3-super:120b`. The `nemotron-3-super:120b` Ollama tag reports a `262144` token context window and was smoke-tested end to end through cuFolio sandbox chat on an RTX 6000 Blackwell. It fit in VRAM at Q4_K_M, but responses are much slower than the 7B fallback. See [OLLAMA_INFERENCE.md](OLLAMA_INFERENCE.md) for setup commands, context-window notes, and the optional Windows-host thinkless proxy used for models that return reasoning without OpenAI `message.content`. ## Authentication This project currently uses a simple local password and signed HTTP-only cookie. Configuration keys: ```bash OPENSHELL_CONTROL_PASSWORD=... OPENSHELL_CONTROL_AUTH_SECRET=... OPENSHELL_CONTROL_RECOVERY_TOKEN=... ``` Pages: - `/login` - `/setup-account` - `/forgot-password` There is no email sender. Forgot-password uses `OPENSHELL_CONTROL_RECOVERY_TOKEN` from `.env.local`, which means it is a host-admin recovery flow. Anyone who can read `.env.local` can reset the dashboard password. After changing `.env.local`, restart the server: ```bash pkill -f 'node server.mjs|npm run dev|npm run start' || true npm run start ``` ## OpenShell And OpenClaw Notes The dashboard shells out to the OpenShell CLI for several operations: - `openshell list` - `openshell sandbox exec` - `openshell sandbox delete` - `openshell policy get` - `openshell policy update` - `openshell provider create/update/delete/list` - `openshell inference set/get/update` The **Quick Deploy New NemoClaw Sandbox** path clones a registered image through OpenShell, but it deliberately does not write the clone into NemoClaw's private `sandboxes.json`. Current NemoClaw entries include lifecycle identity, workload provenance, and agent-specific state that must be issued by NemoClaw itself. The clone remains visible and operable through OpenShell Control; use **Fresh NemoClaw Image** when the new sandbox must participate in NemoClaw-managed lifecycle operations. OpenClaw dashboard access is loopback-only inside the host/sandbox context, so the UI uses local proxy routes: - `/api/openshell/dashboard/proxy` - `/api/openshell/instances/[instanceId]/dashboard/proxy` The custom server in `server.mjs` also handles websocket upgrades for: - operator terminal websocket traffic; - OpenClaw dashboard websocket traffic. Those upgrade paths are protected by the same auth cookie as the HTTP routes. Behind a reverse proxy, route WebSocket upgrades for the dashboard proxy paths to the same `server.mjs` listener as the HTTP app. Use `OPENCLAW_DASHBOARD_BASE_WS_URL` or `BASE_WS_URL` only when the browser-visible WebSocket base must be a fully qualified override such as `wss://control.example.com/api/ws-proxy`. ## Hermes Notes The create flow includes managed NemoClaw agent options beyond the default OpenClaw sandbox. Fresh Hermes Sandbox uses NemoClaw onboard with `--agent hermes`; Fresh Deep Agents Code Sandbox uses `--agent langchain-deepagents-code` for the upstream LangChain Deep Agents Code terminal harness. The existing Fresh NemoClaw Image and Quick Deploy paths remain OpenClaw-oriented. ## Remote Controller Nodes The Wizards page includes **Spawn a Controller Node** for preparing a small OpenShell Control install on another VPS. This is intended for topologies where the browser-facing dashboard and the OpenShell gateway/sandbox hosts are not the same machine. The wizard supports two deployment paths: - **Manual Deploy** generates an SSH/bootstrap script, controller `.env` block, parent-controller URL, node shared secret, OpenShell/OpenClaw routing settings, and readiness checks. - **Autodeploy** connects to the remote host over SSH using a one-time password supplied in the browser, optionally runs the bootstrap with sudo, installs a systemd service when available, and returns bounded stdout/stderr plus the observed host-key fingerprint. Autodeploy does not store the SSH password or write it into generated scripts. For host-key safety, provide an expected SHA256 host-key fingerprint or explicitly select trust-on-first-deploy on a trusted management network. After the controller is running, use its local OpenShell CLI context to manage the sandboxes reachable from that VPS. ## Inference Endpoints Inference endpoint configuration is development-stage. The UI supports per-sandbox route profiles and can apply them live to OpenClaw where possible. Depending on the sandbox and provider, changes may require a sandbox restart to fully take effect inside the container. Supported provider categories in the UI: - Ollama - NVIDIA hosted API with `nvapi-*` credentials through NemoClaw's `build` provider - OpenAI-compatible NVIDIA/enterprise inference endpoints through NemoClaw's `custom` provider with `NEMOCLAW_ENDPOINT_URL`, `COMPATIBLE_API_KEY`, and `NEMOCLAW_PROVIDER_KEY` - vLLM - external HTTP-compatible endpoints ## MCP Access Broker OpenShell Control can install and broker MCP servers without disclosing the full MCP inventory to sandboxes. The MCP page supports: - registry search with paged results; - preconfigured servers, including Blender MCP; - custom stdio or HTTP MCP servers; - global enable/disable state; - per-sandbox `Disabled`, `Allow All`, and `Allow Only` access policy. The sandbox page shows an MCP indicator on each sandbox card. A sandbox lights up when at least one MCP server is allowed by policy. For sandbox handoff, OpenShell Control writes: ```text /sandbox/openshell_control_mcp.md ``` That file contains only the MCP broker endpoints and a sandbox-scoped token. It does not list denied servers, launch commands, credentials, or registry metadata. The broker validates the token and enforces access policy on every capabilities and tool-call request. Broker endpoints: ```text /api/mcp/broker/capabilities /api/mcp/broker/call ``` Broker configuration keys: ```bash MCP_BROKER_TOKEN_TTL_HOURS=168 MCP_BROKER_REQUEST_TIMEOUT_MS=45000 OPENSHELL_CONTROL_MCP_BROKER_URL=http://localhost:3000/api/mcp/broker ``` `OPENSHELL_CONTROL_MCP_BROKER_URL` is optional. Set it only when you need to override discovery. By default the dashboard discovers the active OpenShell Docker gateway and the selected sandbox's proxy environment before writing `/sandbox/openshell_control_mcp.md`. Stdio MCP servers run on the control host. The installer verifies `npx`, creates or reuses a Python virtual environment, installs `uvx` there, and persists that venv path in `.env.local` so the MCP broker can launch `uvx` servers later. Custom MCP server launch commands, such as `node` or `python`, must also be available to the dashboard process. Inter-Sandbox Chat is installed as a baseline MCP server. When it is enabled for at least one sandbox, the controller-launched sidecar watches the lightweight chat store and broker session store, claims only targeted operator messages, writes receipts, and stays out of normal sandbox-to-sandbox chat. It does not run an LLM polling loop. By default, claimed operator messages are routed into the target sandbox's OpenClaw chat over the local OpenClaw websocket gateway. ```bash INTER_SANDBOX_CHAT_SIDECAR_POLL_MS=5000 INTER_SANDBOX_CHAT_DISPATCH_TIMEOUT_MS=120000 INTER_SANDBOX_CHAT_OPENCLAW_SESSION_KEY=inter-sandbox-chat ``` The built-in OpenClaw adapter uses the same sandbox dashboard tunnel mapping as the controller, reads the gateway token from `/sandbox/.openclaw/openclaw.json`, and sends `chat.send` to the configured session. Set `INTER_SANDBOX_CHAT_OPENCLAW_RAW_MESSAGE=1` if you do not want the adapter to wrap chat-room metadata around the operator text. Sandbox-to-sandbox messages can use the same delivery path without loading a whole room into context. `post_message` accepts optional `targetSandboxIds`, `targetSandboxNames`, and `targetAgentIds`; the sidecar relays targeted sandbox-originated messages into each target sandbox's OpenClaw chat. By default it sends only the newest matching sandbox message per target/room poll: ```bash INTER_SANDBOX_CHAT_SIDECAR_RELAY_SANDBOX_MESSAGES=true INTER_SANDBOX_CHAT_SIDECAR_SANDBOX_LATEST_ONLY=true ``` Untargeted shared-room traffic still does not wake every sandbox unless `INTER_SANDBOX_CHAT_SIDECAR_PROCESS_BROADCAST=true` is set. To override dispatch, configure a command hook: ```bash INTER_SANDBOX_CHAT_DISPATCH_COMMAND=/path/to/dispatch-chat-message INTER_SANDBOX_CHAT_DISPATCH_ARGS_JSON='[]' ``` The sidecar sends one JSON payload on stdin with `room`, `message`, `sandboxId`, `sandboxName`, and `agentId`. A custom dispatch command can return JSON like `{ "reply": "done", "note": "handled" }` or plain text; successful replies are posted back to the same room and the operator message is marked `processed`. Set `INTER_SANDBOX_CHAT_SIDECAR_AUTOSTART=0` to disable the controller sidecar. ## File Transfer The file transfer UI is scoped to safe sandbox paths: - `/sandbox` - `/tmp` The default max transfer size is `128 MiB`. Override with: ```bash SANDBOX_FILE_TRANSFER_MAX_BYTES=134217728 ``` ## Development Commands ```bash npm run dev npm run lint npx tsc --noEmit npm run build npm run start ``` After running `npm run build` during development, restart cleanly: ```bash pkill -f 'node server.mjs|npm run dev' || true rm -rf .next npm run dev ``` ## Configuration Copy or edit `.env.local`: ```bash cp .env.example .env.local ``` Common keys: ```bash PORT=3000 NEXT_PUBLIC_DASHBOARD_PORT=3000 NEXT_PUBLIC_API_BASE=/api NEXT_PUBLIC_ENABLE_SANDBOX_OPERATIONS=true # OPENCLAW_DASHBOARD_BASE_WS_URL=wss://control.example.com # BASE_WS_URL=wss://control.example.com # OPENCLAW_DASHBOARD_WS_PROXY_PORT=3001 OPEN_SHELL_CONTAINER=openshell-cluster-nemoclaw OPENSHELL_GATEWAY=nemoclaw # Sandbox create GPU mode: none, auto, or required. Default none passes --no-gpu to NemoClaw. OPENSHELL_CONTROL_CREATE_GPU_MODE=none # For containerized CLI runs, when supported by the installed OpenShell/NemoClaw versions: # OPENSHELL_GATEWAY_HOST=host.docker.internal # OPENSHELL_GATEWAY_PORT=8080 # OPENSHELL_GATEWAY_URL=http://host.docker.internal:8080 OPENSHELL_CONTROL_PASSWORD=change-this-password OPENSHELL_CONTROL_AUTH_SECRET=change-this-random-secret OPENSHELL_CONTROL_RECOVERY_TOKEN=change-this-recovery-token MCP_BROKER_TOKEN_TTL_HOURS=168 MCP_BROKER_REQUEST_TIMEOUT_MS=45000 ``` The controller also accepts an OpenShell config-file form at `~/.config/openshell/gateway.json` or `~/.config/openshell/config.json`: ```json { "gateway": { "host": "host.docker.internal", "port": 8080 } } ``` Those values are translated into `OPENSHELL_GATEWAY_HOST`, `OPENSHELL_GATEWAY_PORT`, and `OPENSHELL_GATEWAY_URL` for controller-launched OpenShell/NemoClaw child processes. When the host shell has `HTTP_PROXY`/`HTTPS_PROXY` set, controller-launched OpenShell/NemoClaw commands also augment `NO_PROXY`/`no_proxy` for loopback, container-host aliases, and `inference.local`. This mirrors NemoClaw's current host-subprocess proxy bypass behavior and avoids routing local gateway or managed inference traffic through a workstation proxy. ## Security Limitations This is not production hardened. Known limitations: - single shared local password; - no user accounts or roles; - no email reset flow; - no rate limiting; - no audit log persistence beyond process/container logs; - local recovery token can reset the password; - assumes a trusted operator host and trusted local filesystem. - MCP stdio servers run as child processes on the control host; only install trusted MCP servers. - MCP broker tokens grant sandbox-scoped access until expiry or rotation. Before exposing this outside a trusted lab network, replace auth with a real identity provider, add role-based access control, add audit logging, use TLS, and review every shell-out path. ## Troubleshooting Check OpenShell: ```bash openshell --version openshell list docker ps | grep openshell ``` If sandbox creation fails with `unresolvable CDI devices nvidia.com/gpu=all`, either create the sandbox with GPU mode set to `none`, or generate the NVIDIA CDI spec on the host: ```bash sudo nvidia-ctk cdi generate --output=/etc/cdi/nvidia.yaml nvidia-ctk cdi list ``` Check auth: ```bash grep OPENSHELL_CONTROL_PASSWORD .env.local grep OPENSHELL_CONTROL_RECOVERY_TOKEN .env.local ``` Check dashboard: ```bash npm run lint npx tsc --noEmit npm run build ``` If the UI behaves oddly after a production build: ```bash pkill -f 'node server.mjs|npm run dev|npm run start' || true rm -rf .next npm run dev ``` ## License OpenShell Control is available under the [MIT License](LICENSE). You may use, copy, modify, merge, publish, distribute, sublicense, and sell copies, provided the copyright and permission notices are retained. The software is provided without warranty.